Perforated metal corner bead for concrete
Common quality defects metal corner bead is mainly used for insulation and interior and exterior decoration, insulation is mainly used for insulation board corners and cornice construction use, indoor and outdoor decoration mainly addressed in the construction and long-term existence of the sun angle is not straight, pretty, easily damaged corner.On the external wall insulation processing, construction is slow, impact resistance poor corner, after a long period of weathering, water seepage, resulting in wall cracks.
Characteristic of the corner bead
1.Metal Corner sided galvanized material with high-quality, anti-aging, corrosion-resistant refractory, effectively prevent rust.
2, the metal strip precise acute angle size designed to avoid a centralized Corner by the impact force when the external force is dispersed evenly around the edge portion of the effective protection of sun angles intact.
3, metal Corner Slice punching and expansion are two, not only to facilitate the nailing strip and such that the angle of the corner portion of the gypsum board or other bonding material bound more firmly.
4, metal Corner strip corner construction without relying on wooden slats, primary plasterers could equally make the perfect corner straight line, shorten construction time, effectively reducing the construction cost.
Application of the Fiberglass mesh
Straight edge to resist rupture or crack, and to protect the most vulnerable part and reinforcement plaster, its website can be firmly anchored into the wings on either side of the ridge line of the plaster corner bead can be formed on the ridgeline of plaster works the full depth of the mud. Corner nets stucco is very important, because the construction and completion of construction at the corner of the easiest to use mortar compromised, and because of its easy construction can save a lot of time.
In cartons 200pcs per carton or as your requirement.